P2 Elite
Probler P2 Elite Gun Assembly with AA Mix Chamber Kit
GCP3RA
P2 Elite
Probler P2 Elite Gun Assembly with AA Mix Chamber Kit
GCP3RA
The Probler P2 Gun is lightweight and easy to manoeuvre - even in difficult spraying positions. Its double piston design provides more than 136 kg (300 pounds) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to...
More InfoFeatures
Product Brochure
The Probler P2 Gun is lightweight and easy to manoeuvre - even in difficult spraying positions. Its double piston design provides more than 136 kg (300 pounds) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications.
- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Anti-crossover design virtually eliminates possibility of material entering the air piston
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Inlet Size (in) | 1/4-18 |
|---|---|
| Air Inlet Thread Gender | Male |
| Air Inlet Thread Type | NPT |
| Compatible Material | Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating |
| Component A Inlet Size (in) | 1/2-20 |
| Component A Inlet Thread Type | UNF |
| Component B Inlet Size (in) | 7/16-18 |
| Component B Inlet Thread Type | UNF |
| Component Type | Plural-Component |
| Fluid Orifice Size (in) | 0.036 |
| Gun Activation | Manual |
| Gun Type | Air-Purge |
| Gun Weight (lb) | 3.9 |
| Gun Weight (oz) | 32.4 |
| Maximum Air Inlet Pressure (MPa) | 0.76 |
| Maximum Air Inlet Pressure (psi) | 110 |
| Maximum Air Pressure (MPa) | 0.76 |
| Maximum Air Pressure (psi) | 110 |
| Maximum Flow Rate (lb/min) | 40 |
| Maximum Fluid Pressure (MPa) | 22 |
| Maximum Fluid Pressure (psi) | 3200 |
| Maximum Fluid Temperature (°F) | 200 |
| Maximum Fluid Working Pressure (MPa) | 22.1 |
| Maximum Fluid Working Pressure (psi) | 3200 |
| Minimum Air Inlet Pressure (MPa) | 0.62 |
| Minimum Air Inlet Pressure (psi) | 90 |
| Minimum Flow Rate (lb/min) | 3 |
| Model | P2 |
| Overall Height (in) | 4.75 |
| Overall Length (in) | 3.125 |
| Overall Width (in) | 6.875 |
| Purge Method | Air |
| Series | Elite |
| Spray Gun Mix Type | Impingement |
| Spray Pattern | Flat |
| Type | Spray Gun |
| Wetted Parts | Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE |
| Air Inlet Size (cm) | 0.635 |
| Air Inlet Size (mm) | 6.35 |
| Air Inlet Thread Gender | Male |
| Air Inlet Thread Type | NPT |
| Compatible Material | Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating |
| Component A Inlet Size (cm) | 1.27 |
| Component A Inlet Size (mm) | 12.7 |
| Component A Inlet Thread Type | UNF |
| Component B Inlet Size (cm) | 1.11125 |
| Component B Inlet Size (mm) | 11.1125 |
| Component B Inlet Thread Type | UNF |
| Component Type | Plural-Component |
| Fluid Orifice Size (cm) | 0.091 |
| Fluid Orifice Size (mm) | 0.91 |
| Gun Activation | Manual |
| Gun Type | Air-Purge |
| Gun Weight (g) | 1770 |
| Gun Weight (kg) | 1.77 |
| Maximum Air Inlet Pressure (MPa) | 0.76 |
| Maximum Air Inlet Pressure (bar) | 7.6 |
| Maximum Air Inlet Pressure (kPa) | 760 |
| Maximum Air Pressure (MPa) | 0.76 |
| Maximum Air Pressure (bar) | 7.6 |
| Maximum Air Pressure (kPa) | 760 |
| Maximum Flow Rate (kg/min) | 18 |
| Maximum Fluid Pressure (MPa) | 22 |
| Maximum Fluid Pressure (bar) | 220 |
| Maximum Fluid Pressure (kPa) | 22000 |
| Maximum Fluid Temperature (°C) | 93 |
| Maximum Fluid Working Pressure (MPa) | 22.1 |
| Maximum Fluid Working Pressure (bar) | 221 |
| Minimum Air Inlet Pressure (MPa) | 0.62 |
| Minimum Air Inlet Pressure (bar) | 6.2 |
| Minimum Air Inlet Pressure (kPa) | 620 |
| Minimum Flow Rate (kg/min) | 1.4 |
| Model | P2 |
| Overall Height (cm) | 12.1 |
| Overall Height (mm) | 121 |
| Overall Length (cm) | 7.9 |
| Overall Length (mm) | 79 |
| Overall Width (cm) | 17.4 |
| Overall Width (mm) | 174 |
| Pattern Size (mm) | 127 |
| Purge Method | Air |
| Series | Elite |
| Spray Gun Mix Type | Impingement |
| Spray Pattern | Flat |
| Type | Spray Gun |
| Wetted Parts | Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE |
