Cart
E-Flo DC 4-Ball
E-Flo DC 4-Ball Electric Circ Pump, 2000 cc, 2 HP, Adv, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cyl, Tri-Clamp
Part Number: EC4440
Image is for illustrative purposes only.
Image is for illustrative purposes only.
Image is for illustrative purposes only.
E-Flo DC 4-Ball
E-Flo DC 4-Ball Electric Circ Pump, 2000 cc, 2 HP, Adv, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cyl, Tri-Clamp
Part Number: EC4440
The E-Flo DC (Dual Control) electric circulating pump has been found to be up to five times more efficient than similar-sized pneumatic pumps – lowering your energy bill and saving you money
Features
Product Brochure
The E-Flo DC (Dual Control) electric circulating pump has been found to be up to five times more efficient than similar-sized pneumatic pumps – lowering your energy bill and saving you money
- The sealed lower has longer maintenance cycles and can be used for every pumping application in your mix room, including catalysed coatings
- Minimal pulsation at changeover provides a more consistent finish
- Electric motor eliminates icing – giving you smoother pump operation and better finished product
- Quiet electric motor improves your work environment, allowing you to remain near the pump for longer periods of time
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Circulation |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (in) | 1-1/2 |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Section Type | Sealed |
| Input Voltage (V ac) | 250 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (GPM) | 10.5 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 1.5 |
| Maximum Working Pressure (psi) | 220 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | AC |
| Portable | Non-Portable |
| Power Rating (HP) | 2 |
| Series | DC 4-Ball |
| Type | Electric Piston Pump |
| Application | Circulation |
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (in) | 1-1/2 |
| Fluid Inlet Size (mm) | 38.1 |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Outlet Size (mm) | 38.1 |
| Fluid Section Type | Sealed |
| Input Voltage (V ac) | 250 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (L/min) | 39.75 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 1.5 |
| Maximum Working Pressure (bar) | 15.2 |
| Maximum Working Pressure (kPa) | 1520 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | AC |
| Portable | Non-Portable |
| Series | DC 4-Ball |
| Type | Electric Piston Pump |
Repair Parts
| Part No. | Description |
|---|---|
| 17K659 | Sealed 4-Ball Lower, 2000 cc, Stainless Steel, Ultralife Rod & Cylinder, Tri-Clamp Fittings |
| 26A399 | KIT,RACK, E-FLO DC |
| 16J463 | COUPLER,FAN DRIVE |
| 26A539 | COVER,FAN |
| 26A401 | KIT,GEAR FOR E-FLO DC |
| 16U113 | KIT,REPLACEMENT,KNOB |
| 26A395 | KIT,FAN, COMPLETE |
| 26A398 | KIT,GEAR, E-FLO DC |
| 26A442 | KIT,BEARING, E-FLO DC |
| 26A397 | KIT,ROTOR, E-FLO DC |
| 24W920 | KIT, ADAPTER, CABLE HALL SWITCH |
| 24U938 | KIT,ENCODER |
| 26A537 | KIT,BOLT |
| 24R050 | KIT,PRESSURE,SENSOR |
| 26A396 | KIT,FAN, ONLY |
Recommended Accessories
