Cart
FinishPro II 395 PC
FinishPro II 395 PC Electric Air-Assisted Airless Sprayer, 110V, UK
Part Number: 17C320
FinishPro II 395 PC
FinishPro II 395 PC Electric Air-Assisted Airless Sprayer, 110V, UK
Part Number: 17C320
With features that make a great sprayer even better, the FinishPro™ II 395 PC is Graco’s premier solution to fine finishing. It delivers a high quality finish at a high production rate, and can handle the most challenging materials.
Features
Product Brochure
With features that make a great sprayer even better, the FinishPro™ II 395 PC is Graco’s premier solution to fine finishing. It delivers a high quality finish at a high production rate, and can handle the most challenging materials.
Includes the features and output to quickly deliver high-quality finishes.
- SmartControl 1.0 with Digital Display
- Increased spray performance
- Consistent spray fan without pressure fluctuations at all spraying pressures
- Digital display accurately shows spraying pressure
- SmartComp
- Compressor is activated by the gun trigger—if you’re not spraying, it’s not running!
- Reduces jobsite noise, resulting in less fatigue
- Automatic shut-off reduces moisture entering the system and extends compressor life
- Pulling trigger delivers instant air to the gun with zero lag
- Release the trigger and SmartComp shuts off the compressor after 5 seconds
- Extends compressor life
- Chromex Endurance Pump
- The most reliable pump on the market—lasts 2 times longer than the next leading brand
- Long-life V-Max Blue packings, Chromex rod and hardened stainless steel cylinder
- QuikAccess intake valve for fast cleaning or debris clearing
- ProConnect
- Fast and easy on-the-job Pump Replacement System
- 1 minute jobsite replacement in 3 simple steps
- Pinless design eliminates the chance of losing parts during the change-out process
- High-Output On-Board Air Compressor
- Ideal for on-site finish jobs
- Delivers 0.09 m³/min (3.2 cfm) at 2.4 bar—enough air to break up the heaviest of materials
- Exclusive Pressure Unloader results in quieter operation
- Cooling coil reduces air temperature, extending the life of the critical components and providing safer operator handling
- Precision-Cut RAC X FF LP SwitchTip
- Less overspray and increased pump life
- Sprays at lower pressures with less overspray
- Pre-orifice design produces a perfect airless finish
- Finer atomisation and soft edges for easier overlapping
- Reduces prep and clean-up
- Includes solvent seal for hot solvents
- G40 Spray Gun
- An industrial quality air-assisted spray gun that delivers superior finishing results
- Integrated air valve improves gun handling
- RAC X guard included
- Flat tip conversion kit included
- Super-Flex Hose Set
- The flexibility to get into tight spaces—focus on the task, not the tool!
- Extremely lightweight in hand, which reduces fatigue
- Connects directly to the gun for maximum flexibility
- Flex Wrap hose skin protects from paint build-up and increases hose durability
- Two Sprayers in One
- Select air-assisted or airless modes, depending on what’s best for the application
- Simple, colour-coded labels easily identify airless and air-assisted airless modes with a single selector switch
- Self-Contained & Portable
- One plug runs the entire unit, simplifying jobsite operation
Specifications & Documents
Technical Specifications
Convert to Imperial| Compatible Material | Primer, Stains, Acrylics, Enamel, Latex |
|---|---|
| Convertible | Non-Convertible |
| Engine Size (HP) | 0.875 |
| Engine Size (kW) | 0.65 |
| Fluid Inlet Size (in) | 1 |
| Fluid Outlet Size (in) | 1/4 |
| Frame Configuration | Hi-Boy |
| Gun Included | 1 |
| Hose Inlet Diameter (in) | 1/4 |
| Includes | G40 Gun, Flex Hose Set, Fluid Hose, Fluid Whip Hose, Air Hose, Air Whip Hose, RAC X FFT210 SwitchTip, RAC X LTX517 SwitchTip, Precision Cut Fine Finish Flat Tip Kit, AAM309 Flat Tip, 100 Mesh Gun Filter |
| Maximum Flow Rate (GPM) | 0.47 |
| Maximum Hose Length (ft) | 50 |
| Maximum Sound Pressure Level (dB(A)) | 79 |
| Maximum Tip Size (in) | 0.021 |
| Maximum Working Pressure (MPa) | 22.8 |
| Maximum Working Pressure (psi) | 2800 |
| Minimum Generator Power (W) | 4000 |
| Model | FinishPro II |
| Motor Type | TEFC brush DC |
| Number of Guns | 1 |
| Overall Height (in) | 40.5 |
| Overall Length (in) | 32.5 |
| Overall Width (in) | 21 |
| Phase | 1 |
| Power Rating (HP) | 1 |
| Power Rating (W) | 746 |
| Power Rating (kW) | 0.75 |
| Power Source | Electric |
| Pressure Control Type | SmartControl 1.0 |
| Product Type | Spray Package |
| Pump Mount Type | ProConnect |
| Pump Type | Endurance |
| Series | 395 PC |
| Spray Type | Air-Assisted Airless |
| Type | Air-Assisted Airless Sprayer |
| Voltage (V) | 110 |
| Weight (lb) | 110 |
| Wetted Material | Stainless Steel, PTFE, Leather, Nylon, Zinc-Plated Carbon Steel, Nickel-Plated Carbon Steel, Tungsten Carbide, Chrome Plating, UHMWPE, Acetal, Polyethylene, Fluoroelastomer, Aluminium, Urethane |
| Compatible Material | Primer, Stains, Acrylics, Enamel, Latex |
| Convertible | Non-Convertible |
| Engine Size (kW) | 0.65 |
| Fluid Inlet Size (cm) | 2.54 |
| Fluid Inlet Size (in) | 1 |
| Fluid Inlet Size (mm) | 25.4 |
| Fluid Outlet Size (cm) | 0.635 |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Size (mm) | 6.35 |
| Frame Configuration | Hi-Boy |
| Gun Included | 1 |
| Hose Inlet Diameter (cm) | 0.635 |
| Hose Inlet Diameter (in) | 1/4 |
| Hose Inlet Diameter (mm) | 6.4 |
| Includes | G40 Gun, Flex Hose Set, Fluid Hose, Fluid Whip Hose, Air Hose, Air Whip Hose, RAC X FFT210 SwitchTip, RAC X LTX517 SwitchTip, Precision Cut Fine Finish Flat Tip Kit, AAM309 Flat Tip, 100 Mesh Gun Filter |
| Maximum Flow Rate (L/min) | 1.8 |
| Maximum Hose Length (cm) | 1524 |
| Maximum Hose Length (m) | 15 |
| Maximum Hose Length (mm) | 15240 |
| Maximum Sound Pressure Level (dB(A)) | 79 |
| Maximum Tip Size (cm) | 0.05842 |
| Maximum Tip Size (in) | 0.021 |
| Maximum Tip Size (mm) | 0.5842 |
| Maximum Working Pressure (MPa) | 22.8 |
| Maximum Working Pressure (bar) | 193 |
| Maximum Working Pressure (kPa) | 19300 |
| Maximum Working Pressure (psi) | 2800 |
| Minimum Generator Power (W) | 4000 |
| Model | FinishPro II |
| Motor Type | TEFC brush DC |
| Number of Guns | 1 |
| Overall Height (cm) | 102.8 |
| Overall Height (mm) | 1028.7000 |
| Overall Length (cm) | 82.5 |
| Overall Length (mm) | 825.5 |
| Overall Width (cm) | 53.3 |
| Overall Width (mm) | 533.4000 |
| Phase | 1 |
| Power Rating (W) | 746 |
| Power Rating (kW) | 0.75 |
| Power Source | Electric |
| Pressure Control Type | SmartControl 1.0 |
| Product Type | Spray Package |
| Pump Mount Type | ProConnect |
| Pump Type | Endurance |
| Region plug type | UK region (type G plug) |
| Series | 395 PC |
| Spray Type | Air-Assisted Airless |
| Type | Air-Assisted Airless Sprayer |
| Voltage (V) | 110 |
| Weight (kg) | 49.9 |
| Wetted Material | Stainless Steel, PTFE, Leather, Nylon, Zinc-Plated Carbon Steel, Nickel-Plated Carbon Steel, Tungsten Carbide, Chrome Plating, UHMWPE, Acetal, Polyethylene, Fluoroelastomer, Aluminium, Urethane |
Product Manuals
