Cart
E-Flo 4-Ball
E-Flo 4-Ball Electric Circ Pump, 3000 cc, Sealed, Ultralife Rod/Cyl, Tri-Clamp, Stand
Part Number: EP01B1
Image is for illustrative purposes only.
E-Flo 4-Ball
E-Flo 4-Ball Electric Circ Pump, 3000 cc, Sealed, Ultralife Rod/Cyl, Tri-Clamp, Stand
Part Number: EP01B1
The dual lower of the E-Flo electric circulating pump minimises pressure changes at the pump outlet. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
Product is Discontinued
Replacement Product Not Available
Features
Product Brochure
The dual lower of the E-Flo electric circulating pump minimises pressure changes at the pump outlet. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
- The sealed lower has longer maintenance cycles and can be used for every pumping application in your mix room, including catalysed coatings
- Three times more efficient than pneumatics
- Process control and feedback
- Slow, smooth changeovers
- Low noise
- Open wet cup version is also available
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Circulation |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (in) | 2 |
| Fluid Outlet Size (in) | 2 |
| Fluid Section Type | Sealed |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (GPM) | 16.2 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 2.3 |
| Maximum Working Pressure (psi) | 330 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | None |
| Portable | Non-Portable |
| Series | 4-Ball |
| Type | Electric Piston Pump |
| Wetted Material | Stainless Steel |
| Application | Circulation |
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (in) | 2 |
| Fluid Inlet Size (mm) | 50.8 |
| Fluid Outlet Size (in) | 2 |
| Fluid Outlet Size (mm) | 50.8 |
| Fluid Section Type | Sealed |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (L/min) | 61.32 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 2.3 |
| Maximum Working Pressure (bar) | 23 |
| Maximum Working Pressure (kPa) | 2300 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | None |
| Portable | Non-Portable |
| Series | 4-Ball |
| Type | Electric Piston Pump |
| Wetted Material | Stainless Steel |
Product Manuals
311601C, 15H877 TDC Sensor Replacement Kit for E-Flo 4-Ball Piston Pump, English
(412 KB)
(English Only)
311604D, Instruction Manual for Crank Arm Rebuild Kit for E-Flo 4-Ball Piston Pump, English
(481 KB)
(English Only)
311605J - Motor Mounting Kits for E-Flo 4-Ball Piston Pumps, Instructions, English
(390 KB)
(English Only)
311616D, Slider Bearing Kit for E-Flo 4-Ball Piston Pump Instructions Manual, English
(481 KB)
(English Only)
Sales Literature
Certifications
Repair Parts
| Part No. | Description |
|---|---|
| 15H874 | KIT, SLIDER CYLINDER REBUILD |
| 15H880 | KIT, MOTOR COUPLER, 184TC FRAME |
| 15H883 | KIT, CRANK ARM |
| 15J422 | Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 1-1/2 npt |
| 16C487 | KIT,MOTOR COUPLER,184TC FRAME |
| 247341 | KIT, COLLECTOR, CYLINDER SLIDER |
| 15H882 | KIT, SLIDER BEARING |
| 24E453 | KIT,MOTOR ADAPTER |
| 255216 | KIT, REPLACEMENT, WRIST PIN |
| 15H877 | KIT, TDC |
| 15H878 | KIT, MANIFOLD, IN/OUTLET GASKET |
| 15J926 | KIT, OUTPUT SHAFT SEAL TOOL |
| 24J305 | SENSOR, CIRCUIT, OPTION |
| 15K012 | KIT ,PNEUMATIC,VFD/BPR CONTROL |
| 15H871 | KIT, REDUCER SEAL REBUILD |
| 15H886 | KIT,GEAR REDUCER REPLACEMENT |
| 15J639 | Inlet/Outlet Fitting, converts 1-1/2 tri-clamp to 2 tri-clamp |
| 24H372 | MODULE, ACS CONVERTER |
Recommended Accessories
