Laird T-Putty 607

One Part Liquid Dispensable Gap Filler | Laird


Laird T-Putty 607


Laird T-Putty™ 607 is a high thermally conductive single part dispensable material designed with automation and vertical stability in mind.

Material Supplier:





Thermal Management


Typical Properties:

  • Construction: Ceramic Filled Silicone Based 
  • Thermal Conductivity (W/mK): 6.0 
  • Color: Gray 
  • Flow Rate (grams/Min): 40 (.125” orifice @ 90psi)
  • Density (g/cc): 3.5 
  • Outgassing (%TML/%CVCM) by mass: .20/.01 
  • Operating Temperature: -40º C – 150º C 

Graco UniXact C300 Automated Dispense Table with Graco Valve System

UniXact C300 Automation Table

  • Work envelope of 254 mm X / 277 mm  Y / 70 mm Z 
  • Approximate overall dimensions 910 mm X 910 mm X 1800 mm including safety enclosure 
  • Easy and intuitive on-board operator controls 
  • 15 kg+ load capability 
  • 200 mm/s point to point; 100 mm/s dispense speed 
  • Material & application dependent 
  • Repeatability of the machine is ± 0.01 mm (0.0004 in) 
  • Accuracy is ± 0.1 mm/300 mm (± 0.004 in/12 in) 
  • 3D contouring dispense capability 
  • Servo drive motors for X, Y, Z and dispense axis (theta) 
  • Ball screw drives with linear guide bearings 
  • Needle feature options – Automatic needle calibration and clean 
  • Optional Y slides to decrease cycle time 
  • Light curtain, guarding, and safety interlock system 
  • Real-time process monitoring with data download 
  • Proprietary Graco software with easy to use interface 

Continuous Positive Displacement Pump

  • 1cc per revolution 
  • 1/2 revolution reverse after dispense 
  • Outlet needle range 12 to 14 gauge 

Delivery Method

  • Dynamite, single acting supply pump 
  • 1 gallon pail follower plate 
  • Air driven pump with 12:1 power factor 
  • Stainless steel construction 
  • 5.0 cc (0.17 oz) per stroke (single acting) displacement volume 
  • Includes connection hoses and fittings to dispense valve

Laird is a registered trademark of Laird PLC. For complete product information, please refer to

Download the spec sheet

Contact an Expert

Please enter a value
Please enter a value
Please select
Your email address is required
Please enter a value
Please enter a value
Please enter a value

Recommended Products

For applying T-Putty 607

Have Questions? Let's Talk.

Call Support

Call Support

7 a.m.–4 p.m. Central Time

Email Support

Email Support

Contact an Expert

Contact an Expert

We'll help you choose the right product for your use.