New
PR-Xv Posi-Ratio®
PR-Xv, Pump Feed, TC Valve, Direct Mount with Standard Tube, 1:1 to 5:1
Part Number: 25S181
PR-Xv Posi-Ratio®
PR-Xv, Pump Feed, TC Valve, Direct Mount with Standard Tube, 1:1 to 5:1
Part Number: 25S181
'Posi-Ratio® (PR) system offers the extreme variability (-Xv) needed for precise meter, mix and dispense of two component adhesives and sealants.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
'Posi-Ratio® (PR) system offers the extreme variability (-Xv) needed for precise meter, mix and dispense of two component adhesives and sealants.
Innovative design and durability make this variable ratio system ideal for bonding, gasketing, metering, potting, sealing and thermal management applications
- Shot size range of 0.3 to 100 ccs meets 1:1 to 5:1 ratio demands with +/- 1 percent shot repeatability.
- Base purge conserves the amount of material used.
- Patented first-in-first-out (FIFO) fluid path eliminates dead zones, where material can accumulate.
- Twin Control (TC) Valve individually regulates on and off of A and B outlets.
- Stainless steel (SST) metering tube has a diamond-like coating.
- Small size and low mass allow for installation flexibility for stand-alone benchtop and automated applications.
- Servo motor delivers precise and repeatable dispense.
- Pressure transducers allow you to constantly monitor fluid pressure.
Specifications & Documents
Technical Specifications
Convert to MetricAir Inlet Size (in) | 1/4 |
---|---|
Ambient/Warm Melt/Hot Melt | Ambient |
Amperage (A) | 10 |
Application | Adhesive, Sealant |
Applicator Type | Twin Control (TC) Dispense Valve |
Coating Type | Standard |
Construction | 303/304 Stainless Steel, Hard Chrome, Ceramic, UHMWPE, NBR, Carbon Steel, PTFE |
Drive Method | Servo motor |
Fluid Outlet Size (in) | 7/8-9 |
Footprint (in) | 21.53x5.71x6.16 |
Frequency (Hz) | 50/60 |
Maximum Air Inlet Pressure (psi) | 100 |
Maximum Fluid Working Pressure (MPa) | 8.3000000000000007 |
Maximum Fluid Working Pressure (psi) | 1200 |
Mix Ratio | 1:1 to 5:1 |
Model | PR-Xv |
Overall Depth (in) | 5.71 |
Overall Height (in) | 6.16 |
Overall Width (in) | 21.53 |
Power Input (V) | 220-240 |
Series | Posi-Ratio® |
Shot Size Range (cc) | 0.03-100 |
Type | Dispensing System |
Weight (lb) | 56.8 |
Air Inlet Size (in) | 1/4 |
Air Inlet Size (mm) | 6 |
Ambient/Warm Melt/Hot Melt | Ambient |
Amperage (A) | 10 |
Application | Adhesive, Sealant |
Applicator Type | Twin Control (TC) Dispense Valve |
Coating Type | Standard |
Construction | 303/304 Stainless Steel, Hard Chrome, Ceramic, UHMWPE, NBR, Carbon Steel, PTFE |
Drive Method | Servo motor |
Fluid Outlet Size (in) | 7/8-9 |
Footprint (in) | 21.53x5.71x6.16 |
Frequency (Hz) | 50/60 |
Maximum Air Inlet Pressure (bar) | 7 |
Maximum Air Inlet Pressure (kPa) | 700 |
Maximum Air Inlet Pressure (psi) | 100 |
Maximum Fluid Working Pressure (MPa) | 8.3000000000000007 |
Maximum Fluid Working Pressure (bar) | 83 |
Maximum Fluid Working Pressure (psi) | 1200 |
Mix Ratio | 1:1 to 5:1 |
Model | PR-Xv |
Overall Depth (cm) | 14.5 |
Overall Depth (mm) | 145 |
Overall Height (cm) | 15.6 |
Overall Height (mm) | 156 |
Overall Width (cm) | 75.900000000000006 |
Overall Width (mm) | 759 |
Power Input (V) | 220-240 |
Series | Posi-Ratio® |
Shot Size Range (cc) | 0.03-100 |
Type | Dispensing System |
Weight (kg) | 26 |