G-Mini Pumps

Make the most of your space, budget and machines. The full-featured G-Mini® offers reliable lubrication in a small footprint to fit more types of machines. Use it to simplify everyday maintenance, extend lifecycles and optimize uptime.

25R803_G_Mini_Controller_FF

Follower Plate & Stir Paddle 

  • This unique combination combats oil separation while ensuring the pump element “loading chamber” is always full.
close

Patent-Pending Heater

  • Pump grease down to -40º C/F when ordered with the heater option.
close

Two Control Options

  • No Controller: pair with either an external controller or PLC.
  • Controller: Easy-to-program controller can be utilized for both time based and cycle based systems and provides low level alert and alarm.
close

M12 Input

  • M12 cycle or proximity switch input standard on all pumps with a controller.

5-Wire CPC Power Cable

  • Multifunction cable supplies power to the pump, pairs with a remote manual run button, and provides low level or cycle fault output.
close

G-Series Pump Comparison Guide

Loading ...
Products currently unavailable.

Filter results


Filters

1-15 of 20 results

Documents & Videos

NAME
Language
Size
File Type
Download
NAME
Language
Size
File Type
Download

Graco G-Series Pump Comparison Guide

 

 G-Mini Pump

 

G1 Pump

 

G3 Pump

Reservoir0.5 and 1 L
Include stir paddle and follower plate
2, 4 and 8 L
Include stir paddle; follower plate available
2, 4, 8, 12, 16 and 20 L
Include stir paddle; follower plate available
FluidsGrease up to NLGI #2Oil, Grease up to NLGI #2Oil, Grease up to NLGI #2
Power Source12 VDC or 24 VDC90-230 VAC, 12 VDC or 24 VDC90-230 VAC, 12 VDC or 24 VDC
ControlStandard and ControllerStandard and PlusStandard, Pro, SP, Max
Control Features

One controller with 2 options:

Time-Based:

  • 1 to 30 min on time in 1-min increments
  • 15 min to 99 hr off time in 15-min increments up to 1 hr and then 1-hr increments from 1 to 99 hr
  • Manual run
  • Pin code
  • Low-level alert and alarm shutdown
  • Pre-lube 

Cycle-Based:

  • 1 to 99 cycles
  • 15 min to 99 hr off time in 15-min increments up to 1 hr and then 1-hr increments from 1 to 99 hr
  • Manual run
  • Pin code
  • Low-level alert and alarm shutdown
  • Pre-lube

Plus controller:

  • 1 to 30 min on time in 1-min increments
  • 1 to 24 hr off time in 1-hr increments
  • Manual run 
  • Pin code
  • Low-level shut down

Pro and Max controllers:

  • 1 sec to 30 min on time
  • 1 min to 99 hr 59 min off time
  • Manual run
  • Pin code
  • Low-level alert and alarm shutdown
  • Machine count
  • Pre-lube
  • 1 to 3 monitoring inputs for cycle or pressure*
  • DMS* 

*Max controller only

SP controller:

  • 1 to 99 cycles
  • 15 min to 8 hr off time in 15-min increments
  • 1 input for cycle • Manual run
  • Pin code
  • Low-level alert and alarm shutdown
  • Pre-lube
Power CordCPC; sold separatelyDIN or CPC; sold separatelyDIN or CPC; included
Pump Element2 maximum; 1 factory-installed1 maximum; 1 factory-installed3 maximum; 1 factory-installed
Output Per Pump0.18 in3 (3 cm3 ) / min0.25 in3 (4 cm3 ) / min0.25 in3 (4 cm3 ) / min
Maximum Working Pressure4,100 psi (28 MPa, 280 bar)5,100 psi (35 MPa, 352 bar)5,100 psi (35 MPa, 352 bar)
Metering DeviceSeries ProgressiveSeries ProgressiveSeries Progressive or Single Line Parallel (with addition of a G3 Vent Valve) 
MonitoringController can monitor 1 zone for cyclesNoneSP controller can monitor 1 sensor for cycles;
Max controller can monitor up to 3
independent sensors for cycles or pressure
Proximity or Cycle Switch TypePNPPump has no cycle inputPNP or NPN
Electric MotorInline gear boxLoad minimizing drive with offset cam designLoad minimizing drive with offset cam design
AccessoriesUses most G3 accessories including
pressure relief, power cables, high flow
fill stud, 5-gallon fill pump
Uses most G3 accessories including pressure relief, power cables, high-flow
fill stud, 5-gallon fill pump
See G3 Accessories in ILE Buyer’s Guide

Have Questions? Let's Talk.

Call Support

Call Support

Monday–Friday
7:30 a.m.–5 p.m. Central Time

Email Support

Email Support

Request a Quote

Request a Quote

We'll help you choose the right product for your use.

GET HELP FROM A LOCAL DEALER

Showing dealers for

Have Questions? Let's Talk.

Call Support

Call Support

Monday–Friday
7:30 a.m.–5 p.m. Central Time

Email Support

Email Support

Contact Graco

Contact Graco

We'll help you choose the right product for your use.

Graco