Graco Inc.

Husky 2200 Air-Operated Diaphragm Pumps  2 inch Positive Displacement Double Diaphragm Pump

The Husky 2200 has a 2 inch (50.8 mm) connection and is available in polypropylene and PVDF.

Where to Buy
Share |

The Husky 2200 air-operated diaphragm pump features a single piece polypropylene center section for increased reliability and chemical compatibility, plus a patented, high-reliability modular air valve that is online serviceable.

This diaphragm pump is designed with a reinforced frame for improved reliability and will help to eliminate fluid leakage. 

Benefits of the Husky 2200 double diaphragm pumps

  • Overall improved air efficiency
  • Highest fluid flow rate in its class
  • Expanded material offering to handle endless applications
  • Available with Overmolded diaphragms (up to 5 times longer diaphragm life)

 

Overview
Maximum fluid flow
200 gpm (757 l/min)
Maximum Fluid Discharge Pressure
125 psi (8.6 bar, 0.86 MPa)
Maximum size pumpable solids
3/8 in (9.5 mm)
Fluid displacement per cycle
1.6 g (6.1 liters)

Husky 2200 Performance

Husky_2200-charts

Looking for a repair kit? Use our pump configuration tools to select the repair kit for your pump:

  • Step 1 – Go to our Pump Selector Tool
  • Step 2 – Fill in your pumps part number in the right corner
  • Step 3 – Get an overview of all repair kits and accessories for your pump.

 

Process Pump Selector
Chemical Compatibility Guide

Contact Us

Your privacy is very important to Graco. We will not sell your information to other companies. However, to best serve your needs, your information may be shared with Graco's distributor partners. For details, view our Privacy Policy.

  • 2 in (50.8 mm) ANSI center and end-porting options available
  • High flow - 200 gpm (757 lpm) in a compact, portable size
  • Fluid pressure to 125 psi (8.6 bar, 0.86 MPa)
  • Lube-free operation
  • Available in polypropylene and PVDF

Manuals

Literature

Other Resources

View values in metric units. View values in U.S. units.

Husky 2200 Air-Operated Diaphragm Pump
Maximum fluid working pressure
125 psi
0.86 MPa, 8.6 bar
Air pressure operating range
20 to 125 psi
0.14 to 0.86 MPa, 1.4 to 8.6 bar
Air inlet size
3/4 in. npt(f)
3/4 in. npt(f)
Air exhaust size
1 in.
1 in.
Fluid inlet and outlet size (ANSI/DIN flange)
1.5 in
38 mm
Maximum suction lift (reduced if balls don’t seat well due to damaged balls or seats, lightweight balls, or extreme speed of cycling)
Wet: 31 ft, Dry: 16 ft
Wet: 9.4 m, Dry: 4.9 m
Maximum size pumpable solids
3/8 in.
9.5 mm
Minimum ambient air temperature for operation and storage. NOTE: Exposure to extreme low temperatures may result in damage to plastic parts.
32° F
0° C
Air consumption
Standard diaphragms
70 scfm at 70 psi; 100 gpm
2.0 m³/min at 0.48 MPa, 4.8 bar, 379 lpm
Overmolded diaphragms
75 scfm at 70 psi, 100 gpm
2.1 m³/min at 0.48 MPa, 4.8 bar, 379 lpm
Maximum air consumption
Standard diaphragms
140 scfm
4.0 m³/min
Overmolded diaphragms
157 scfm
4.4 m³/min
Noise (dBa): Sound power measured per ISO-9614–2. Sound pressure was tested 3.28 ft (1 m) from equipment.
Sound Power
95.2 at 70 psi and 50 cpm, 101.8 at 100 psi and full flow
95.2 at 4.8 bar and 50 cpm, 101.8 at 7.0 bar and full flow
Sound Pressure
87.3 at 70 spi and 50 cpm, 94.7 at 100 psi and full flow
87.3 at 4.8 bar and 50 cpm, 94.7 at 7.0 bar and full flow
Fluid flow per cycle
Standard diaphragms
1.6 gallons
6.1 liters
Overmolded diaphragms
1.3 gallons
4.9 liters
Maximum free-flow delivery
Standard diaphragms
200 gpm
757 lpm
Overmolded diaphragms
200 gpm
757 lpm
Maximum pump speed
Standard diaphragms
125 cycles per minute
125 cycles per minute
Overmolded diaphragms
125 cycles per minute
125 cycles per minute
Weight
Polypropylene
80 lb
36.3 kg
PVDF
106 lb
48.1 kg
Wetted Parts
Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of construction: Polypropylene or PVDF
Non-wetted external parts
stainless steel, polypropylene
stainless steel, polypropylene