CHOFORM 5528
Form-in-place (FIP) Silicone EMI Gasket | Parker Chomerics
CHOFORM 5528
PRODUCT DESCRIPTION:
CHOFORM® 5528 form-in-place EMI gasket is a moisture cure silicone system with >70 dB shielding effectiveness while providing a soft, low closure force gasket.
PRODUCT CHARACTERISTICS:
Color: Red
Cure System: Moisture
Volume Resistivity (Ω-cm): 0.003
Bead Size:
- Smallest Recommended: 0.018 x 0.022 (0.46 x 0.56)
- Largest Recommended (single pass): 0.042 x 0.049 (1.07 x 1.24)
Recommended Uses:
- Densely populated electronics packaging
- PCB inter-compartmental isolation with thin wall boundaries
- Castings, machined metal, and conductive plastic enclosures
- Transportation/Automotive sensor housing
- Military and Aerospace electronics
- Telecommunications
For complete product information, please refer to ph.parker.com
graco system solution:
UNIXACT C300 AUTOMATION TABLE:
- Work Envelope: (X-Y-Z): 254 mm x 277 mm x 70 mm (10 in x 11 in x 2.75 in)
- Approximate Overall Dimensions: 1905 mm x 939 mm x 1041 mm (75 in x 37 in x 41 in)
- Drive Method: Ball screw drives with linear guide bearings
- Drive System: Servo drive motors for X, Y, Z, and theta (dispense)
- Accuracy: +/- 0.1 mm/300 mm (+/- 0.004 in/12 in)
- Position Repeatability: 0.01 mm (0.0004 in)
- Dispense Speed: 100 mm/s (4 in/s)
PROGRESSIVE CAVITY PUMP:
- Consists of a rotor and stator that create sealed cavities for the material to flow through.
- With high accuracy and repeatability, Graco's Progressive Cavity Pump is well-suited for abrasive materials
- Continuous, volumetric dispense with high repeatability
- Wide range of adjustable flow rates
- Wear-resistant and low maintenance
- Available in several volumes for application flexibility
DYNAMITE 22 SUPPLY SYSTEM:
- The ideal solution for delivering precise and consistent material feed from small containers ranging from 300cc cartridges to 1 gallon pails
- Extensive product lifecycle even for heavy duty applications using highly viscous and abrasive materials
- With a minimum weight of 28kg, the mini extruders are suitably designed to reduce space and allowing great flexibility
- Simple and user-friendly designed control panel
Download the spec sheet
All trademarks and registered trademarks are the property of their respective owners.