DOWSIL EF-6525

Product Description:

DOWSIL™  EF-6525 RTV Low Viscosity Silicone Foam is a two-component low-density liquid elastomer that cures into a foamed elastomer.  Part A and Part B have a 1:1 mix ratio to expand into a dispensable material for encapsulation of intricate electrical components. Able to cure at room temperature, this material can have a reduced cure time and increased throughput when heat is applied. The DOWSIL™ EF-6525 RTV Low Viscosity Silicone Foam is stable over a wide temperature range and is suitable for applications where stress relief is required.

Video: Dow DOWSIL™ EF-6525 Foam Encapsulation of Battery Cells

Product Characteristics:

CTMs at 23°C (73°F) and 50% relative humidity

Color: Grey

Snap Time: -14 minutes

Density: 0.3 g/cm3

Hardness: 30 Shore 00

Tensile Strength: 22.1 psi

Elongation: 69%

Thermal Conductivity: 0.075 W/mK

Dielectric Strength: 6.8 kV/mm

UL Recognition: 94 V-0

Working Time: Higher ambient temperatures will increase the cure rate and reduce the working time of the material.

Cure Time: Roughly 30 mins (at room temperature), cure time can be accelerated 6-10 minutes at 70°C.

Shelf Life: When stored at w 32°C (90°F), the material has a shelf life of 12 months from the date of manufacture in the original, unopened container.

Recommended Uses:

• Encapsulation of intricate or delicate electrical components
• Dispensed directly on to into devices
• Flow and fill in around current collectors and battery cells

For complete product information, please refer to dow.com.

Graco Meter, Mix, and Dispense System Solutions:

Graco offers multiple solutions to effectively meter, mix, and dispense the two-component DOWSIL™  EF-6525 RTV Low Viscosity Silicone Foam.

Check-Mate Supply System:

• Pressure ratio range: from 5:1 to 85:1
• Minimizes left-over materials and reduces waste
• Optimal for transferring sealants or adhesives to one or more operator dispensing stations 
• Can feed high volume applicators, multiple meters or proportioners 
• Tracks material usage and flow
• High flow and pressures increase production 

EFR:

• Fit for two-component materials like DOWSIL™ EF-6525 RTV Low Viscosity Silicone Foam
• Highly accurate, even with low flow rates
• Superior control in precision dispensing
• Capable of handling a wide range of materials
• Easy to configure, operate and maintain

MD2:

• Accurately dispenses and mixes two-component sealants and adhesives
• Minimizes maintenance time and costs while maximizing dispense time
• Featured applications include bonding, potting, encapsulation, and thermal management
• Maximum viscosity of 1,000,000 cps

^{All trademarks and registered trademarks are the property of their respective owners.}