SaniForce 2150 PH

SaniForce 2150, 2" PH SST Pneumatic Diaphragm Pump, SS Center, SS Seats, EP Balls, EO Diaphragms

Part Number: SP2B.0173

product image

SaniForce 2150 PH

SaniForce 2150, 2" PH SST Pneumatic Diaphragm Pump, SS Center, SS Seats, EP Balls, EO Diaphragms

Part Number: SP2B.0173

Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Questions About this Product?

If you’re not finding the information you need, ask one of our experts.

Ask an Expert

Features

Product Brochure
Graco's SaniForce 2150, 2-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 180 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.

Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.

  • 2 inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar)
  • Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
  • Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
  • Externally serviceable air valves deliver leading efficiency and reduce downtime.
  • Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
  • EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
  • Equipped with leak sensor to notify users when processes may be compromised
  • 316L stainless steel wetted section
  • All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
  • Pass solids up to 0.5 in. (12.7 mm)

Specifications & Documents

Technical Specifications

Convert to Metric
Air Exhaust Port Size (in) 3/4
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/2
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Sanitary
Ball Material EPDM
Center Section Material Stainless Steel
Compatible Material Food, Personal Care, Pharmaceutical
Compressor Required Yes
Configuration Code 2150PH.PS03ASSASSEPEOEP31
Connection Type Tri-Clamp
Diaphragm Material EPDM Overmold
Fluid Passage Size (cm) 5
Fluid Passage Size (in) 2
Fluid Passage Size (mm) 50
Fluid Section Material 316L Stainless Steel
For Use With Food, Personal Care, Pharmaceutical
Hazardous Location Approval ATEX, IECEx
Manifold Configuration Center Port
Manifold O-Ring Material EPDM
Material Stainless Steel
Material Certification EN 1024:2004 Type 3.1 (Serialized)
Maximum Air Consumption (SCFM) 200
Maximum Air Pressure (MPa) 0.8
Maximum Air Pressure (psi) 120
Maximum Cycle Rate (CPM) 135
Maximum Flow Rate (GPM) 180
Maximum Fluid Operating Temperature (°C) 121
Maximum Fluid Operating Temperature (°F) 250
Maximum Fluid Pressure (MPa) 0.8
Maximum Fluid Pressure (psi) 120
Maximum Solid Size (in) 0.5
Minimum Fluid Operating Temperature (°C) -40
Minimum Fluid Operating Temperature (°F) -40
Model SaniForce
Overall Height (in) 35.7
Power Source Pneumatic
Pump Ratio 1:1
Pump Type Pharmaceutical
Seat Material 316 Stainless Steel
Series 2150 PH
Standards Met FDA Compliant Materials, EC 1935/2004
Surface Finish 20 Ra
Tri-Clamp Connection Size 2-inch
Type Pneumatic Diaphragm Pump
Weight (lb) 111
Air Exhaust Port Size (in) 3/4
Air Exhaust Port Thread Gender Female
Air Exhaust Port Thread Type NPT
Air Inlet Size (in) 1/2
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Sanitary
Ball Material EPDM
Center Section Material Stainless Steel
Compatible Material Food, Personal Care, Pharmaceutical
Compressor Required Yes
Configuration Code 2150PH.PS03ASSASSEPEOEP31
Connection Type Tri-Clamp
Diaphragm Material EPDM Overmold
Fluid Passage Size (cm) 5
Fluid Passage Size (in) 2
Fluid Passage Size (mm) 50
Fluid Section Material 316L Stainless Steel
For Use With Food, Personal Care, Pharmaceutical
Hazardous Location Approval ATEX, IECEx
Manifold Configuration Center Port
Manifold O-Ring Material EPDM
Material Stainless Steel
Material Certification EN 1024:2004 Type 3.1 (Serialized)
Maximum Air Pressure (MPa) 0.8
Maximum Air Pressure (bar) 8
Maximum Air Pressure (kPa) 800
Maximum Air Pressure (psi) 120
Maximum Cycle Rate (CPM) 135
Maximum Flow Rate (L/min) 681
Maximum Fluid Operating Temperature (°C) 121
Maximum Fluid Operating Temperature (°F) 250
Maximum Fluid Pressure (MPa) 0.8
Maximum Fluid Pressure (bar) 8
Maximum Fluid Pressure (kPa) 800
Maximum Fluid Pressure (psi) 120
Maximum Solid Size (cm) 1.27
Maximum Solid Size (mm) 12.7
Minimum Fluid Operating Temperature (°C) -40
Minimum Fluid Operating Temperature (°F) -40
Model SaniForce
Power Source Pneumatic
Pump Ratio 1:1
Pump Type Pharmaceutical
Seat Material 316 Stainless Steel
Series 2150 PH
Standards Met FDA Compliant Materials, EC 1935/2004
Surface Finish 20 Ra
Tri-Clamp Connection Size 2-inch
Type Pneumatic Diaphragm Pump

Repair Parts

Part No. Description
25P063 2-inch EPDM Seal Kit for HS, PH and 3A Pump Models
25R709 SaniForce 2150 HS-PH Complete Fluid Repair Kit with EP Ball, EO Diaphragm, EP Seal
25P270 EPDM Overmold Diaphragm Kit for 2- to 4-inch Pump

GET HELP FROM A LOCAL DEALER

Showing dealers for

Have Questions? Let's Talk.

Call Support

Call Support

Monday–Friday
7:30 a.m.–5 p.m. Central Time

Email Support

Email Support

Find a Distributor

Find a Distributor

For local sales and service support

Graco