Therm-O-Flow Guns Manual and Automatic Dispense Applicators
For applying hot melt materials
Perfect for high pressure, high flow sealant and adhesive applications, Therm-O-Flow Guns are available with electric switches so they can be used in conjunction with automated equipment.
- Precise temperature control from PID control panel
- Piston-actuated ball and seat design for positive shut off
- Light trigger pull
- Rugged all metal construction
Manuals
- 311209U - Hot Melt Dispense Guns Therm-O-Flow 200, English
- 310538T, Therm-O-Flow Automatic Dispense Valves, Instructions-Parts, English [other languages]
- 309376L - EnDure Automatic Dispense Valves, Instructions-Parts List [other languages]
- 309962J - 120 Volt Hot Melt Dispensing Gun, Instructions-Parts, English
Literature
Hot Melt Dispense Guns | |
Maximum operating temperature |
400°F
204°C
|
Maximum fluid working pressure |
5000 psi
34.5 MPa, 345 bar
|
Outlet port size |
5/8-18 UNF-2B
5/8-18 UNF-2B
|
Inlet port size on gun housing |
7/8-14 UNF- 2B
7/8-14 UNF- 2B
|
Inlet port size on fluid swivel |
7/8-14 JIC(m)
7/8-14 JIC(m)
|
Voltage |
230/240 Vac
230/240 Vac
|
Wattage |
120 W
120 W
|
Resistance temperature detector(platinum RTD; 0.00385 ohm/ohm/°C) |
108.2 ohms @ 70°F
108.2 ohms @ 70°F
|
Heater resistance |
individually: 890 ohms, +/- 70 ohms
individually: 890 ohms, +/- 70 ohms
|
wired in parallel: 445 ohms, +/- 35ohms | |
Weight |
without swivel: 2.7 lb
1.2 kg
|
with swivel: 3.4 lb |
1.5 kg
1.5 kg
|
Dimensions | |
Height: 7.5 in. |
191 mm
191 mm
|
Width: 3.0 in |
76 mm
76 mm
|
Length: Models 249514 and 249515: 9.0 in |
229 mm
229 mm
|
Length: Models 249512 and 249513: 10.5 in. |
267 mm
267 mm
|
Length: Models 297273 and 297274: 11.5 in |
292 mm
292 mm
|
Wetted parts |
Aluminum, fluorocarbon rubber, stainless steel, PTFE, carbon steel, brass
Aluminum, fluorocarbon rubber, stainless steel, PTFE, carbon steel, brass
|