Cart
E-Flo DC 4-Ball Electric Circulation Pump, 1000cc, 1 HP, 480V, Basic, ATEX/FM/IECEx, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Stand
Part Number: EC2A61
Image is for illustrative purposes only.
E-Flo DC 4-Ball Electric Circulation Pump, 1000cc, 1 HP, 480V, Basic, ATEX/FM/IECEx, Open Wet Cup, Ultralife Rod/Cylinder, Tri-Clamp, Stand
Part Number: EC2A61
E-Flo DC (Dual Control) electric circulating pumps are up to five times more efficient than comparable pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation, increases flow rates and decreases downtime.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
E-Flo DC (Dual Control) electric circulating pumps are up to five times more efficient than comparable pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation, increases flow rates and decreases downtime.
- Basic model has simple control knobs to easily adjust pump settings.
- Minimal pulsation at changeover provides a more consistent finish.
- Open wet cup lower includes Ultralife ceramic coating for improved durability.
- Meets requirements of these approval agencies: ATEX, FM, IECEx
- Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.
- Pump can run alone to keep production running, if lower maintenance is required.
Specifications & Documents
Technical Specifications
Convert to Metric| Construction | Stainless Steel, PTFE, Leather, UHMWPE, Tungsten Carbide, Fluoropolymer |
|---|---|
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | Tri-Clamp |
| Fluid Inlet Type | Tri-Clamp |
| Fluid Outlet Size (in) | 1.5 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | Tri-Clamp |
| Fluid Section Type | 4-Ball, Open Wet Cup |
| Includes | Basic Control, Stand |
| Maximum Continuous Cycle Rate (CPM) | 12 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Voltage (V ac) | 480 |
| Maximum Working Pressure (MPa) | 1.7 |
| Maximum Working Pressure (psi) | 247 |
| Minimum Operating Temperature (°F) | 32 |
| Minimum Voltage (V ac) | 380 |
| Overall Depth (in) | 19.88 |
| Overall Height (in) | 57.99 |
| Overall Width (in) | 17 |
| Type | Electric Piston Pump |
| Weight (lb) | 220.5 |
| Construction | Stainless Steel, PTFE, Leather, UHMWPE, Tungsten Carbide, Fluoropolymer |
| Fluid Inlet Size (in) | 1.5 |
| Fluid Inlet Size (mm) | 38.1 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | Tri-Clamp |
| Fluid Inlet Type | Tri-Clamp |
| Fluid Outlet Size (in) | 1.5 |
| Fluid Outlet Size (mm) | 3.81 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | Tri-Clamp |
| Fluid Section Type | 4-Ball, Open Wet Cup |
| Includes | Basic Control, Stand |
| Maximum Continuous Cycle Rate (CPM) | 12 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Voltage (V ac) | 480 |
| Maximum Working Pressure (MPa) | 1.7 |
| Maximum Working Pressure (bar) | 17 |
| Maximum Working Pressure (kPa) | 1700 |
| Maximum Working Pressure (psi) | 247 |
| Minimum Operating Temperature (°C) | 0 |
| Minimum Voltage (V ac) | 380 |
| Overall Depth (cm) | 50.5 |
| Overall Depth (mm) | 505 |
| Overall Height (cm) | 147.3 |
| Overall Height (mm) | 1473 |
| Overall Width (cm) | 43.2 |
| Overall Width (mm) | 432 |
| Type | Electric Piston Pump |
| Weight (kg) | 100 |
Product Manuals
Sales Literature
Certifications
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English
(141 KB)
(English Only)
