- Manual and automatic configurations
- Intrinsically safe fluid panels easily integrate into hazardous areas
- Single- or multi-color and catalysts
- Accurate ratio assurance for superior finish quality
- Simple programming allows fast set up and efficient process control
- Advanced web interface provides consolidated system management and reporting
ProMix 2KS Proportioners Electronic Plural Component Proportioning Systems
Electronic proportioner for a broad range of solventborne, waterborne, and acid catalyzed materials
Graco's two- and three-component proportioners offer precise and reliable electronic plural component proportioners for a broad range of solventborne, waterborne, and acid catalyzed materials. From entry level to upgraded applications, the ProMix 2KS and 3KS systems provide flexibility and increased efficiency.
- Offers the highest degree of ratio assurance
- Provides critical process variable feedback
- Built in system safeguards
- Effective color change solution
- Efficient material tracking and reporting
Graco has specific ProMix proportioners that are designed to manage tough acid catalyst applications like cabinetry and bar counter tops. The corrosion resistance fluid section, plus the smart fluid plate with 316 and 17-4 SST catalyst sections, can easily handle strong acid catalysts.

Manuale
- 312775K, ProMix 2KS, Installation Manual for Manual Systems, English [alte limbi]
- 312776L, Manual, ProMix 2KS Manual Systems, Operation, English [alte limbi]
- 312777H - ProMix 2KS Plural Component Proportioner, Repair-Parts Manual, English [alte limbi]
- 312778G - ProMix 2KS, Installation Manual for Automatic Systems, English [alte limbi]
- 312779K, ProMix 2KS Automatic Systems, Operation, English [alte limbi]
- 312780M, Manual, ProMix 2KS Plural Component Proportioner, Repair and Parts, English [alte limbi]
- 312781H, Manual, Fluid Mix Manifold Instructions-Parts, English [alte limbi]
- 312784H, Manual, Gun Flush Box Kit, Instructions-Parts, English [alte limbi]
- 312786J - Dump Valve and Third Flush Valve Kits Instructions-Parts Manual, English [alte limbi]
- 312787H, Manual, Color Change Module Kits, Instructions and Parts, English [alte limbi]
- 406719B, 15T632 Air Flow Switch Kit, Instructions, English (Doar engleză)
- 406715C, Instruction Form for Injection Kit 15U955, English [alte limbi]
- 406799A, 15V256 Automatic Upgrade Kit, Instructions/Parts, English (Doar engleză)
- 406804C, Instruction Form for Integrator Kit 24B618 (100cc) English (Doar engleză)
- 406713B, Dispense Valve Acid Kit, Instructions-Parts, English [alte limbi]
- 406800B, 15V825 Discrete I/O Board Kit, Instructions/Parts, English [alte limbi]
- 312782J, Air Actuated Dispense Valve Instruction-Parts Manual, English [alte limbi]
- 312783E - Color and Catalyst Change Valves Instruction Manual, English [alte limbi]
- 312785D, Network Communication Kits Instruction-Parts Manual, English [alte limbi]
- 313290A - 15V950 Floor Stand, English [alte limbi]
- 313212B, Manual, 15V534 Gun Flush Box Interface Kit Instructions, English [alte limbi]
- 313542F, Instructions, 15W034 Beacon Kit, 122193 Beacon Tower, English [alte limbi]
- 199266S, ProMix 1KS, 2KS, 3KS, and Accessories, EU-Declaration of Conformity (Doar engleză)
- 199304J, ProMix 2KS EasyKey Interface, EU-Declaration of Conformity (Doar engleză)
- 199310D, Module, Gateway Communication & AWI, ProMix 2KS and 3KS , Informer Power Supply, 318-162 EC-Declaration of Conformity (European Community) English (Doar engleză)
312775K, ProMix 2KS, Installation Manual for Manual Systems, English
312776L, Manual, ProMix 2KS Manual Systems, Operation, English
312777H - ProMix 2KS Plural Component Proportioner, Repair-Parts Manual, English
312778G - ProMix 2KS, Installation Manual for Automatic Systems, English
312779K, ProMix 2KS Automatic Systems, Operation, English
312780M, Manual, ProMix 2KS Plural Component Proportioner, Repair and Parts, English
312786J - Dump Valve and Third Flush Valve Kits Instructions-Parts Manual, English
312787H, Manual, Color Change Module Kits, Instructions and Parts, English
406715C, Instruction Form for Injection Kit 15U955, English
406713B, Dispense Valve Acid Kit, Instructions-Parts, English
406800B, 15V825 Discrete I/O Board Kit, Instructions/Parts, English
312785D, Network Communication Kits Instruction-Parts Manual, English
313290A - 15V950 Floor Stand, English
313542F, Instructions, 15W034 Beacon Kit, 122193 Beacon Tower, English
Documentaţie
- 339996ENEU ProMix™ 2KS - Two-Component Electronic Proportioning System [alte limbi]
- 344807ENEU ProMix 3KS [alte limbi]
- 345099EN-F Acid Catalyst for ProMix Proportioners (Doar engleză)
- 345101EN Finishing Automation Equipment Overview [alte limbi]
- 344880ENEU ProControl™ 1KS [alte limbi]
- 2KS Waterborne Urethane (Doar engleză)
- 3KS CARC Application (Doar engleză)
- Viscosity Control with ProMix 3KS (Doar engleză)
339996ENEU ProMix™ 2KS - Two-Component Electronic Proportioning System
344807ENEU ProMix 3KS
345101EN Finishing Automation Equipment Overview
Alte resurse
- ProMix 2KS FAQ's
- ProMix 2KS/3KS Software Updates
- CAD Drawing (2D) - ProMix 2KS - .zip (Doar engleză)
- CAD Drawing (3D) - ProMix 2KS - .zip (Doar engleză)
- CAD Drawing (2D) - 15V950 - Floor Stand - .zip (Doar engleză)
- CAD Drawing (3D) - 15V950 Floor Stand - .zip (Doar engleză)
- CAD Drawing (2D) - 249849 - .zip (Doar engleză)
- ProMix Selector
- ProMix ROI
ProMix 2KS Manual System | |
Maximum working air pressure |
100 psi
7.0 bar, 0.7 MPa
|
Air supply |
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
|
Air filter inlet size |
3/8 npt(f)
3/8 npt(f)
|
Air filtration for air logic and purge air (Graco-supplied) |
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
|
Air filtration for atomizing air (user-supplied) |
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
|
Mixing ratio range |
0.1:1–50:1
0.1:1–50:1
|
Fluids handled |
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
|
Viscosity range of fluid |
20–5000 cps
20–5000 cps
|
Fluid filtration (user-supplied) |
100 mesh minimum
100 mesh minimum
|
External power supply requirements |
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
|
Operating temperature range |
41–122°F
5–50°C
|
Environmental conditions rating |
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
|
Wetted parts |
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
|
Maximum fluid working pressure | |
Base system |
4000 psi
280 bar, 28 MPa
|
Low pressure color change |
300 psi
21 bar, 2.1 MPa
|
High pressure color change |
3000 psi
210 bar, 21 MPa
|
Coriolis Meter |
2300 psi
161 bar, 16.1 MPa
|
Fluid Flow Rate Range | |
G3000, G250 Meter |
0.02–1.00 gpm
75–3800 cc/min
|
G3000HR, G250HR Meter |
0.01–0.50 gpm
38–1900 cc/min
|
Coriolis Meter |
0.005–1.00 gpm
20–3800 cc/min
|
S3000 Solvent Meter (accessory) |
0.01–0.50 gpm
38–1900 cc/min
|
Fluid Porting | |
Flow Meter Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
Dose Valve/Color Valve Adapter Inlets |
1/4 npt(f)
1/4 npt(f)
|
Fluid Outlet Size (static mixer) |
1/4 npt(f)
1/4 npt(f)
|
Noise Level | |
Sound pressure level |
below 70 dBA
below 70 dBA
|
Sound power level |
below 85 dBA
below 85 dBA
|
ProMix 2KS Automatic System | |
Maximum working air pressure |
100 psi
7.0 bar, 0.7 MPa
|
Air supply |
75–100 psi
5.2–7.0 bar, 0.5–0.7 MPa
|
Air filter inlet size |
3/8 npt(f)
3/8 npt(f)
|
Air filtration for air logic and purge air (Graco-supplied) |
5 micron (minimum) filtration required; clean and dry air
5 micron (minimum) filtration required; clean and dry air
|
Air filtration for atomizing air (user-supplied) |
30 micron (minimum) filtration required; clean and dry air
30 micron (minimum) filtration required; clean and dry air
|
Mixing ratio range |
0.1:1–50:1
0.1:1–50:1
|
On-ratio accuracy |
up to +/- 1%, user selectable
up to +/- 1%, user selectable
|
Fluids handled |
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
|
Viscosity range of fluid |
20–5000 cps
20–5000 cps
|
Fluid filtration (user-supplied) |
100 mesh minimum
100 mesh minimum
|
External power supply requirements |
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
|
Operating temperature range |
41–122°F
5–50°C
|
Environmental conditions rating |
indoor use, pollution degree (2), installation category II
indoor use, pollution degree (2), installation category II
|
Wetted parts |
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
|
Maximum fluid working pressure | |
Base system |
4000 psi
275.8 bar, 27.58 MPa
|
Low pressure color change |
300 psi
20.6 bar, 2.07 MPa
|
Coriolis Meter |
2300 psi
158.6 bar, 15.86 MPa
|
RoboMix system |
190 psi
13.1 bar, 1.31 MPa
|
Flow control |
190 psi
13.1 bar, 1.31 MPa
|
Fluid Flow Rate Range | |
G3000, G250 Meter |
0.02–1.00 gpm
75–3800 cc/min
|
G3000HR, G250HR Meter |
0.01–0.50 gpm
38–1900 cc/min
|
Coriolis Meter |
0.005–1.00 gpm
20–3800 cc/min
|
S3000 Solvent Meter (accessory) |
0.01–0.50 gpm
38–1900 cc/min
|
Fluid Porting | |
Flow Meter Fluid Inlet |
1/4 npt(f)
1/4 npt(f)
|
Dose Valve/Color Valve Adapter Inlets |
1/4 npt(f)
1/4 npt(f)
|
Fluid Outlet Size (static mixer) |
1/4 npt(f)
1/4 npt(f)
|
Noise Level | |
Sound pressure level |
below 70 dBA
below 70 dBA
|
Sound power level |
below 85 dBA
below 85 dBA
|
-
Vopsele, coloranţi şi lacuri pentru contractori şi persoane fizice
-
Răşini
-
Polimeri
-
Produs pe bază de apă
-
Produs pe bază de solvent
-
Substanţe solide în procent ridicat
-
Mai multe componente
-
CARC
-
Particule metalice
-
Coloranţi
-
Vernisuri
-
Lacuri
-
Catalizator acid
-
Emailuri
-
Epoxi
-
Priză rapidă
-
Straturi de protecţie UV
-
Echipament agricol – producţie
-
Atelier de vopsitorie
-
Cabine de vopsit
-
Echipament pentru construcţii – producţie
-
CARC
-
Sisteme electronice auto
-
Sisteme electronice pentru consumator
-
Producţia de sisteme electronice
-
Finisaj/producţie mobilă
-
Finisaj/producţie generală de metale
-
Producţia de produse din lemn
-
Producţia de ornamente şi mulaje arhitecturale
-
Căi ferate
-
Transport cu autocamioane
-
Parcuri auto
-
Gestionare deşeuri – producţie echipamente
-
Vehicule pentru recreere
-
Rulote
-
Industria aerospaţială – finisaj
-
Lemn şi produse din lemn – dozatoare
-
Producţie de echipament pentru sarcini grele
-
Echipament forestier
Accesorii
Produse asociate
-
Informer
Monitor fluid rates, reduce material waste & improve spray performance. Ideal for solvent tracking & other fi...
-
ProMix 2KE Proportioners
Compact, entry-level proportioner available in pump and metered versions for all spray techno...
-
ProMix 3KS Proportioners
Purchase with a ProMix 2KS system or upgrade an existing 2KS system
-
ProMix PD2K Proportioners
100% Positive Displacement Technology for accurate mix ratios and consistent performance