Cart
Viscount II
Viscount Hydraulic Motor with Dura-Flo 1800 (430 cc) Lower, 3 UHMWPE/2 PTFE Packings
Part Number: 222897
Viscount II
Viscount Hydraulic Motor with Dura-Flo 1800 (430 cc) Lower, 3 UHMWPE/2 PTFE Packings
Part Number: 222897
The rugged pump lower construction with Severe Duty rods and cylinders reduces downtime and extends the interval between repairs. The simple construction makes service and repair fast and easy. The efficient hydraulic powered piston makes these pumps the ideal choice for factory and outdoor mobile u...
More Info
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
The rugged pump lower construction with Severe Duty rods and cylinders reduces downtime and extends the interval between repairs. The simple construction makes service and repair fast and easy. The efficient hydraulic powered piston makes these pumps the ideal choice for factory and outdoor mobile use, even at below freezing temperatures.
- Clean, quiet operation with no airborne contamination
- Up to three times more energy efficient than comparable compressed air systems
- Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
- Reduce routine maintenance and cut repairs time in half of comparable pump lowers
- Eliminate downtime without ice build-up
Specifications & Documents
Technical Specifications
Convert to Metric| Application | Supply |
|---|---|
| Compatible Material | Waterborne, Solventborne, High Solids, Xirallic, CARC, Metallics, Topcoats, Stains, Varnish |
| Construction | Stainless Steel |
| Fluid Inlet Size (in) | 2 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Outlet Thread Gender | Male |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Material | Stainless Steel |
| Maximum Flow Rate (GPM) | 6.8 |
| Maximum Hydraulic Fluid Inlet Pressure (psi) | 1500 |
| Maximum Intermittent Cycle Rate (CPM) | 60 |
| Maximum Operating Temperature (°F) | 150 |
| Maximum Working Pressure (MPa) | 6.9 |
| Maximum Working Pressure (psi) | 1000 |
| Model | Viscount |
| Portable | Non-Portable |
| Pump Ratio | 26:1 |
| Series | II |
| Type | Hydraulic Piston Pump |
| Application | Supply |
| Compatible Material | Waterborne, Solventborne, High Solids, Xirallic, CARC, Metallics, Topcoats, Stains, Varnish |
| Construction | Stainless Steel |
| Fluid Inlet Size (in) | 2 |
| Fluid Inlet Size (mm) | 50.8 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Outlet Size (mm) | 38.1 |
| Fluid Outlet Thread Gender | Male |
| Fluid Outlet Thread Type | NPT |
| Fluid Section Type | 2-Ball |
| Material | Stainless Steel |
| Maximum Flow Rate (L/min) | 25.74 |
| Maximum Hydraulic Fluid Inlet Pressure (bar) | 103 |
| Maximum Hydraulic Fluid Inlet Pressure (kPa) | 10300 |
| Maximum Hydraulic Fluid Inlet Pressure (psi) | 1500 |
| Maximum Intermittent Cycle Rate (CPM) | 60 |
| Maximum Operating Temperature (°C) | 66 |
| Maximum Working Pressure (MPa) | 6.9 |
| Maximum Working Pressure (bar) | 69 |
| Maximum Working Pressure (kPa) | 6900 |
| Maximum Working Pressure (psi) | 1000 |
| Model | Viscount |
| Portable | Non-Portable |
| Pump Ratio | 26:1 |
| Series | II |
| Type | Hydraulic Piston Pump |
Product Manuals
