Cart
SaniForce 4150 HS
SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms
Part Number: SP4F.0048
SaniForce 4150 HS
SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms
Part Number: SP4F.0048
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
Graco's SaniForce 4150, 4-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 90 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.
- 4 inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Externally serviceable air valves deliver leading efficiency and reduce downtime.
- EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316L stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Flapper check enables passage of solids up to 3.8 in. (96.5 mm)
- Single piece manifolds reduce tri-clamps and gaskets creating a cleaner fluid path and design
Specifications & Documents
Technical Specifications
Convert to Metric| Air Exhaust Port Size (in) | 3/4 |
|---|---|
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | 316 Stainless Steel Flapper |
| Center Section Material | Stainless Steel |
| Compatible Material | Edible Oil, Food, Personal Care |
| Compressor Required | Yes |
| Configuration Code | 4150HS.PS01ASSGFL-EOEP21 |
| Connection Type | No Manifold |
| Diaphragm Material | EPDM Overmold |
| Fluid Passage Size (cm) | 10 |
| Fluid Passage Size (in) | 4 |
| Fluid Passage Size (mm) | 100 |
| Fluid Section Material | 316L Stainless Steel |
| For Use With | Food, Personal Care |
| Hazardous Location Approval | ATEX, IECEx |
| Manifold Configuration | Dual Inlet/Outlet |
| Manifold O-Ring Material | EPDM |
| Material | Stainless Steel |
| Material Certification | EN 1024:2004 Type 2.1 (Standard) |
| Maximum Air Consumption (SCFM) | 235 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 225 |
| Maximum Flow Rate (GPM) | 90 |
| Maximum Fluid Operating Temperature (°C) | 121 |
| Maximum Fluid Operating Temperature (°F) | 250 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (in) | 3.8 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Model | SaniForce |
| Overall Height (in) | 19.9 |
| Power Source | Pneumatic |
| Pump Ratio | 1:1 |
| Pump Type | High Sanitation |
| Seat Material | 316 Stainless Steel |
| Series | 4150 HS |
| Standards Met | FDA Compliant Materials, EC 1935/2004, USP Class VI |
| Surface Finish | 32 Ra |
| Tri-Clamp Connection Size | 4-inch |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 132 |
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | 316 Stainless Steel Flapper |
| Center Section Material | Stainless Steel |
| Compatible Material | Edible Oil, Food, Personal Care |
| Compressor Required | Yes |
| Configuration Code | 4150HS.PS01ASSGFL-EOEP21 |
| Connection Type | No Manifold |
| Diaphragm Material | EPDM Overmold |
| Fluid Passage Size (cm) | 10 |
| Fluid Passage Size (in) | 4 |
| Fluid Passage Size (mm) | 100 |
| Fluid Section Material | 316L Stainless Steel |
| For Use With | Food, Personal Care |
| Hazardous Location Approval | ATEX, IECEx |
| Manifold Configuration | Dual Inlet/Outlet |
| Manifold O-Ring Material | EPDM |
| Material | Stainless Steel |
| Material Certification | EN 1024:2004 Type 2.1 (Standard) |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 225 |
| Maximum Flow Rate (L/min) | 340 |
| Maximum Fluid Operating Temperature (°C) | 121 |
| Maximum Fluid Operating Temperature (°F) | 250 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 9.65 |
| Maximum Solid Size (mm) | 96.5 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Model | SaniForce |
| Power Source | Pneumatic |
| Pump Ratio | 1:1 |
| Pump Type | High Sanitation |
| Seat Material | 316 Stainless Steel |
| Series | 4150 HS |
| Standards Met | FDA Compliant Materials, EC 1935/2004, USP Class VI |
| Surface Finish | 32 Ra |
| Tri-Clamp Connection Size | 4-inch |
| Type | Pneumatic Diaphragm Pump |
Product Manuals
Sales Literature
Certifications
