Cart
E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, Advanced, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cylinder, Tri-Clamp, Stand
Part Number: EC3471
Image is for illustrative purposes only.
E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, Advanced, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cylinder, Tri-Clamp, Stand
Part Number: EC3471
Save money with the E-Flo DC (Dual Control) electric circulating pump. It operates up to five times more efficiently than similar pneumatic pumps. The 4-ball lower with active surge tank minimizes pulsation and requires little or no maintenance. Advanced control optimizes performance by allowing Int...
More Info
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
Save money with the E-Flo DC (Dual Control) electric circulating pump. It operates up to five times more efficiently than similar pneumatic pumps. The 4-ball lower with active surge tank minimizes pulsation and requires little or no maintenance. Advanced control optimizes performance by allowing Intelligent Paint Kitchen (IPK) integration.
- Electric motor eliminates icing, resulting in smoother pump operation and a better finished product
- Low maintenance sealed lower can be used for any pumping application, including catalyzed coatings
- Quiet electric pump motor helps reduce noise levels, allowing operators to work nearby for a longer time
- Minimal pulsation at changeover means a more consistent finish
Specifications & Documents
Technical Specifications
Convert to Metric| Application | Circulation |
|---|---|
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Construction | Stainless Steel |
| Fluid Inlet Size (in) | 1-1/2 |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Section Type | Sealed |
| Includes | Advanced Control Ready, Stand, Active Surge Tank |
| Input Voltage (V ac) | 240 Single Phase |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (GPM) | 8 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Working Pressure (MPa) | 2 |
| Maximum Working Pressure (psi) | 285 |
| Minimum Operating Temperature (°F) | 32 |
| Motor Type | AC |
| Portable | Non-Portable |
| Power Rating (HP) | 2 |
| Type | Electric Piston Pump |
| Application | Circulation |
| Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Construction | Stainless Steel |
| Fluid Inlet Size (in) | 1-1/2 |
| Fluid Inlet Size (mm) | 38.1 |
| Fluid Outlet Size (in) | 1-1/2 |
| Fluid Outlet Size (mm) | 38.1 |
| Fluid Section Type | Sealed |
| Includes | Advanced Control Ready, Stand, Active Surge Tank |
| Input Voltage (V ac) | 240 Single Phase |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (CPM) | 20 |
| Maximum Flow Rate (L/min) | 30 |
| Maximum Input Amperage (A) | 20 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Working Pressure (MPa) | 2 |
| Maximum Working Pressure (bar) | 19.7 |
| Maximum Working Pressure (kPa) | 1965 |
| Maximum Working Pressure (psi) | 285 |
| Minimum Operating Temperature (°C) | 0 |
| Motor Type | AC |
| Portable | Non-Portable |
| Type | Electric Piston Pump |
Product Manuals
Sales Literature
Certifications
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English
(141 KB)
(English Only)
