Cart
Dura-Flo D200
Supply Unit, Check-Mate, 22:1, 3 in. Ram, 200L, Single EPDM Wiper
Part Number: GDFG59
Dura-Flo D200
Supply Unit, Check-Mate, 22:1, 3 in. Ram, 200L, Single EPDM Wiper
Part Number: GDFG59
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials
- For large drums up to 200 liter (55 gal)
- Graco D200 - For high-volume in-plant applications
- Industry-first controls give you immediate and important information at the touch of a button
- Quick placement of drum
- Platen wipers can be replaced in seconds
- Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
Specifications & Documents
Technical Specifications
Convert to Metric| Ambient/Warm Melt/Hot Melt | Ambient |
|---|---|
| Application | Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill |
| Construction | Stainless Steel, Tungsten Carbide, Acetal, PTFE, EPDM, Aluminum, Zinc-Plated Carbon Steel |
| Container Type | Drum |
| Material Container Volume (gal) | 52.8 |
| Maximum Air Inlet Pressure (psi) | 150 |
| Maximum Flow Rate (GPM) | 9.2 |
| Maximum Fluid Pressure (psi) | 2270 |
| Maximum Height (ft) | 3.33 |
| Maximum Height (in) | 40 |
| Maximum Operating Temperature (°F) | 120 |
| Minimum Height (ft) | 5.4 |
| Minimum Height (in) | 64.8 |
| Model | Dura-Flo |
| Overall Depth (in) | 25 |
| Overall Width (in) | 42 |
| Power Type | Pneumatic |
| Pump Ratio | 22:1 |
| Pump Type | Double Ball |
| Ram Material | Carbon Steel |
| Series | D200 |
| Type | Supply Unit |
| Ambient/Warm Melt/Hot Melt | Ambient |
| Application | Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill |
| Construction | Stainless Steel, Tungsten Carbide, Acetal, PTFE, EPDM, Aluminum, Zinc-Plated Carbon Steel |
| Container Type | Drum |
| Material Container Volume (l) | 200 |
| Maximum Air Inlet Pressure (bar) | 10.34 |
| Maximum Air Inlet Pressure (kPa) | 1034 |
| Maximum Air Inlet Pressure (kg/cm²) | 10.55 |
| Maximum Air Inlet Pressure (psi) | 150 |
| Maximum Flow Rate (L/min) | 34.8 |
| Maximum Fluid Pressure (bar) | 156.5 |
| Maximum Fluid Pressure (kPa) | 15650 |
| Maximum Fluid Pressure (psi) | 2270 |
| Maximum Height (cm) | 101.6 |
| Maximum Height (m) | 1.02 |
| Maximum Height (mm) | 1016 |
| Maximum Operating Temperature (°C) | 49 |
| Minimum Height (cm) | 164.6 |
| Minimum Height (m) | 1.65 |
| Minimum Height (mm) | 1646 |
| Model | Dura-Flo |
| Overall Depth (cm) | 63.5 |
| Overall Depth (mm) | 635 |
| Overall Width (cm) | 106.7 |
| Overall Width (mm) | 1067 |
| Power Type | Pneumatic |
| Pump Ratio | 22:1 |
| Pump Type | Double Ball |
| Ram Material | Carbon Steel |
| Series | D200 |
| Type | Supply Unit |
Product Manuals
Sales Literature
Certifications
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English
(141 KB)
(English Only)
